FURNACE INSTALLATION IN WEST JORDAN — DONE IN A DAY

Swapping a 22-year-old 80% AFUE furnace for a new 95%+ high-efficiency unit cuts West Jordan winter gas bills 15 to 25%, takes one working day, and buys you another 15 to 20 years of reliable heat. The actual install is the easy part. Doing it correctly — proper load calculation, right-sized equipment, sealed supply plenum, new flue, condensate routed safely, permit pulled with Salt Lake County — separates a ten-year install from a two-winter call-back.

Most homes east of Bangerter were built with oversized furnaces. The original 80s-90s builder sized for peak load plus a generous safety factor, which meant the system short-cycled on average days and wasted gas running full blast for five minutes at a time. We see this constantly in eastern West Jordan, Westridge, and the older Copperton homes. When we replace, we do a real Manual J heat-loss calculation for your home's envelope, insulation, window area, and exposure. Nine times out of ten the right replacement is one half-ton smaller than what you had.

What gets installed

A modern 95%+ AFUE condensing furnace vents through PVC (not metal flue), pulls combustion air from outside, and condenses the exhaust to extract nearly all of the heat. That condensate has to drain somewhere — tied into an existing drain, pumped to a floor drain, or routed outside with freeze protection (critical in West Jordan where overnight lows hit single digits in January). If we're replacing an 80% atmospheric-vent unit, the existing metal flue usually can't be reused because your water heater can no longer pull enough draft on its own. We re-line the chimney or convert the water heater's venting as part of the job.

The components that matter

• Variable-speed ECM blower — quieter, better airflow distribution, 30-50% less electricity than old PSC motors common in 80s eastside homes
• Two-stage or modulating burner — runs at 40-60% output on mild days, full output when it's 8°F, no more short cycling
• Sealed combustion — pulls air from outdoors, not from conditioned basement space
• Stainless heat exchanger — 20-year design life in West Jordan's thermal cycling between 8°F nights and 50°F sunny days
• Communicating controls (optional) — if you're also upgrading thermostat and AC, fully communicating systems modulate together

Brands we install

Trane XR, XL, and XV series. Lennox Merit and Signature. Carrier Performance and Infinity. Rheem Classic Plus and Prestige. Rheem and Trane have the best parts availability at the West Jordan-area supply houses we pull from. Factory-trained on all four. We quote two to three brand options at different price points — the "best value" unit for your home isn't always the top-tier model.

Install day in West Jordan

One tech crew, typically two people, 6 to 9 hours on site. Old unit pulled and hauled out. New unit set on a fresh pad, leveled, connected to gas, electrical, and the existing ductwork (or modified ductwork if the plenum is wrong — common in older eastside homes). PVC vent and intake cored through the rim joist or exterior wall. Condensate drain routed and tested with freeze protection. Thermostat reconfigured or upgraded. Combustion analyzer run before the final wipe-down — CO, O2, flue temp, flame rectification all documented. Salt Lake County permit inspection usually happens within 5 business days; we're there for the inspection.

Warranty and financing

Factory parts warranty is 10 years on every major component with registration (which we handle). Our labor warranty matches — 10 years on the install workmanship. Financing is available: 0% for 12 months on approved credit for standard installs, 24 to 60 month plans for larger jobs. Quality Service Club HVAC members get 15% off accessories (humidifier, media filter, zoning) added at install, plus the first year of maintenance included.

Honest pricing

A standard 95% AFUE single-stage furnace, properly installed with permit and PVC venting, runs $5,200 to $7,800 in West Jordan. Two-stage units with ECM blowers move to $6,500 to $9,200. Fully modulating 97%+ AFUE units with communicating controls run $8,500 to $12,500. Anyone quoting $3,500 for a "full install" is skipping the permit, reusing bad ductwork, or using a non-branded unit that'll fail inspection and die early. We've seen those show up on replacement calls many times.